XL Specialized 40 Ton Folding Gooseneck

XL Specialized 45 Ton Mechanical Folding Gooseneck

Deposit: $7,000 to start production. 

 

  • CAPACITY 80,000 LB OVERALL
  • CONCENTRATED: 80,000 LB IN 12' GOOSENECK FULL WIDTH HYDRAULIC FOLDING
  • 9' 2" LONG
  • 16" 32" KING PIN SETTING
  • 102" 86" SWING CLEARANCE
  • 50" 5TH WHEEL HEIGHT
  • (3) BENT D-RINGS PER SIDE
  • 2" APITONG DECKING
  • LANDING GEAR ON DRIVERSIDE OF GOOSENECK AND SIDE OF MAIN DECK AT REAR OF DECK OVER CONTROLS, WITH WIDE FOOT WITH UPWARD TAPER ON ALL SIDES
  • REINFORCED VANDALISM DOORS--NOT PIANO HINGED
  • DECK PLATE
  • 57" GAUGE RAIL SUBMERGED IN GOOSENECK AND DECK
  • ONE SET OF 8' PIN ON ALUMINUM GOOSENECK RAMPS WITH BOLT ON STEEL TIP MAIN DECK 19' 8" WIDE WITH 1 1⁄2" CAMBER
  • 24" LOADED DECK HEIGHT
  • 8" GROUND CLEARANCE
  • 2" APITONG DECKING CENTER COVERED WITH SQUARE MESH
  • 5 5/8" C-CHANNEL CROSSMEMBERS ON 12" CENTERS
  • (2) 16" SIDE BEAMS
  • 12" SWING OUT OUTRIGGERS BRACKETS ONLY ON 24" CENTERS
  • 9 BENT D-RINGS PER SIDE - 18 TOTAL
  • FRONT PIN-ON RAMP STORAGE BOXES IN ROADSIDE MAIN DECK BEAM WITH DOORS AND LOCKS. RAMPS SLIDE INTO DECK
  • (2) TOOLBOXES WITH LOCKABLE COVERS LOCATED AT REAR OF MAIN DECK AT TRANSITION TO REAR BRIDGE
  • (2) 1' OPEN TOOL WELLS AT FRONT OF MAIN DECK
  • DECK PLATE
  • RAIL TO BE 1/8" TO 1/4" BELOW WOOD ON TRAILER
  • NO GAP BETWEEN RAIL AND WOOD DECKING ON DECK
  • FRONT PIN ON RAMPS MUST BE REINFORCED AT THE ATTACHMENT POINT
  • LIQUID FILLED AIR GAUGE REAR DECK 16' 10" LONG WITH 32" TRANSITION LENGTH
  • 38" LOADED DECK HEIGHT
  • STEEL TREADPLATE DECKING
  • 1 BENT D-RING AT TOP CENTER OF TAILGATE
  • 3 PAIRS OF PAN STYLE D-RINGS --LOCATED BETWEEN AXLES AND BEHIND LAST AXLE
  • 20,000 POUNDS WINCH WITH 100' OF 9/16" CABLE; CABLE ROLLER AT TOP OF TRANSITION. CONTROLS AT REAR OF MAIN DECK, ON DRIVERSIDE, WITH POWER UNIT CONTROLS
  • 11' 0" DECK TO REAR BRIDGE TRANSITION RAMP WITH BRACKETS ON BOTH SIDES. REMOVABLE FOR REPAIR OR REPLACEMENT. BOLTED ON DECK
  • FRAME REINFORCEMENT, AIR, ELECTRIC AND BRACKETS FOR 1 AXLE BOOSTER
  • RAISE AND LOWER VALVE
  • WEST COAST SET UP WITH PIN STYLE LOCKS
  • TRACTION AIDS ON REAR TRANSTION
  • 2 STAKE POCKETS AT REAR OF TRAILER FOR WIDE LOAD SIGN
  • SKID PLATES UNDER AIR BAG ARMS OVERALL LENGTH & WIDTH OVERALL LENGTH: 48'
  • OVERALL WIDTH: 102" HYDRAULICS 13HP HONDA SELF-CONTAINED POWER UNIT WITH DUAL HYDRAULICS
  • ENGINE IN ROADSIDE BOLSTER
  • COUPLERS OUT BOTH SIDES OF DECK AND ALSO OUT FRONT OF GOOSENECK
  • ENGINE PULL START EASILY ACCESSIBLE AT ROADSIDE FRONT BOLSTER
  • HYDRAULIC BYPASS VALVE
  • BATTERY ON RUBBER MOUNTS
  • EXTERNAL BATTERY CONNECTIONS TO BE MALE STUDS
  • SELECTOR VALVE FOR ON-BOARD HYDRAULICS
  • MANUAL PIN LOCKS
  • SAFETY CHAIN HOOKS ON WEB
  • HYDRAULIC HOSES UNDER GOOSENECK TO BE PLUMBED TO MINIMIZE CONTACT WITH GROUND
  • BULKHEAD FITTINGS FOR AIR, ELECTRIC & HYDRAULICS MOUNTED TO FRONT OF GOOSENECK
  • LOCKABLE TOOLBOX IN GOOSENECK
  • STEEL TREADPLATE ON CENTER OF GOOSENECK
  • 5 GALLON GAS TANK FOR AUXILARY POWER UNIT
  • KEVLAR MATERIAL CYLINDER BOOT PROTECTORS
  • RECESS MOUNTING BOLTS ON UNDERSIDE OF TRAILER FOR ANY HYDRAULIC EQUIPMENT MOUNTED IN CENTER REAR OF DECK
  • DECK PLATE AXLES (3) 25,000 NOMINAL, 83 1/2" TRACKING
  • DECAL FOR TOTAL HIGHWAY SPEED ALLOWED PER TIRE SIZE AND GVWR
  • 54" AXLE SPACING
  • 2S1M SPRING BRAKES ON 1 AXLES
  • 15" X 8 5/8" BRAKES
  • HUB PILOT, OUTBOARD DRUMS
  • DECK PLATE
  • HEND-TURNER / 25,000 CAPACITY/ AIR WHEELS & TIRES 265 / 70R / 19.5 TIRES
  • 7.5 X 19.5 / STEEL / DISC / PILOTED HUBS LIGHTING D.O.T APPROVED 12V SEALED HARNESS
  • RUBBER MOUNTED LED LIGHTS
  • (1) MID-TURN SIGNAL PER SIDE
  • (2) CLEARANCE LIGHTS PER SIDE
  • 7 POLE ELECTRICAL SOCKET
  • 2 TAIL LIGHT PACKAGE WITH ALUMINUM COVER PAINT 1 YEAR WARRANTY
  • BLACK, IH RED, OR NEW CAT YELLOW
  • AIR & ELECTRIC DONE AFTER PAINT
  • MANY CUSTOM OPTIONS AVAILABLE